RC-Monster Forums - View Single Post - Can the MMP handle a 6-Pole motor?

himalaya · 04.13.2010, 01:18 AM

Be careful to use Tenshock multipole motors. I was trying to drive a Tenshock 2230 with a HobbyWing Seaking 180A(same hardware as Ezrun 150A), it cogs badly when my finger pulls just half trigger. This ESC drives CC Neu 1515 2200KV and Medusa 36-80-1600KV(both are 4 pole) perfectly. Increasing timing advance can delay the cog to 2/3 throttle but never completely went away.

	(#7)
himalaya RC-Monster Carbon Fiber Offline Posts: 392 Join Date: Nov 2008	04.13.2010, 01:18 AM Be careful to use Tenshock multipole motors. I was trying to drive a Tenshock 2230 with a HobbyWing Seaking 180A(same hardware as Ezrun 150A), it cogs badly when my finger pulls just half trigger. This ESC drives CC Neu 1515 2200KV and Medusa 36-80-1600KV(both are 4 pole) perfectly. Increasing timing advance can delay the cog to 2/3 throttle but never completely went away. ....What a Blue Sky....