RC-Monster Forums - View Single Post

Arct1k · 04.22.2010, 04:07 PM

Rather radom but the technical drawing still shows the fan:

http://www.castlecreations.com/suppo...ro-onecell.pdf

Also the text says :

"These controllers will have their BEC circuit disabled -- removed actually -- so you will need an outboard 4.8 - 6.0 volt power source to run your electronics. We recommend a CC BEC or CC BEC Pro. "

Isn't that a touch pointless as running on 1 cell you need a voltage step up device such as the Novak boost to get to 5/6v...

Also says "We’ve also taken the fans off so users have an easier time squeezing them into tight confines" so adding a CC BEC Pro (which is about the same size as a MMPro) would be a little pointless...

PS Yes I'm having one of those afternoons.

	(#3)
Arct1k RC-Monster Mod Offline Posts: 6,597 Join Date: Apr 2007 Location: NJ	04.22.2010, 04:07 PM Rather radom but the technical drawing still shows the fan: http://www.castlecreations.com/suppo...ro-onecell.pdf Also the text says : "These controllers will have their BEC circuit disabled -- removed actually -- so you will need an outboard 4.8 - 6.0 volt power source to run your electronics. We recommend a CC BEC or CC BEC Pro. " Isn't that a touch pointless as running on 1 cell you need a voltage step up device such as the Novak boost to get to 5/6v... Also says "We’ve also taken the fans off so users have an easier time squeezing them into tight confines" so adding a CC BEC Pro (which is about the same size as a MMPro) would be a little pointless... PS Yes I'm having one of those afternoons.