RC-Monster Forums - View Single Post - 1/6 bl-lst

mistercrash · 05.04.2010, 01:09 PM

You are an inspiration. This build is extraordinary. Makes my builds look like child's play. I don't use a CNC, I don't have the knowledge to use them (yet) or the CNC machining either. I do most of the stuff by hand but for cutting CF, diamond disks make a very clean cut. For making holes and counter sinking, Carbide or Tungsten carbide bits and end mills cut through CF like butter and also make very clean cuts. I can only use high speeds because I make the cuts with a cheap router on a small router table and it only has one speed, fast

Thank you for sharing this build, it is truly wonderful.

	(#88)
mistercrash Guelph, Canada, eh! Offline Posts: 1,083 Join Date: Sep 2007 Location: Guelph, Ontario, Canada	05.04.2010, 01:09 PM You are an inspiration. This build is extraordinary. Makes my builds look like child's play. I don't use a CNC, I don't have the knowledge to use them (yet) or the CNC machining either. I do most of the stuff by hand but for cutting CF, diamond disks make a very clean cut. For making holes and counter sinking, Carbide or Tungsten carbide bits and end mills cut through CF like butter and also make very clean cuts. I can only use high speeds because I make the cuts with a cheap router on a small router table and it only has one speed, fast Thank you for sharing this build, it is truly wonderful. No brain, no headaches.