View Single Post
Old
  (#11)
superek4
RC-Monster Aluminum
 
superek4's Avatar
 
Offline
Posts: 832
Join Date: Jan 2009
05.11.2010, 06:45 PM

Trust me I hv used feigao n even 4poles neumotors, medusa, castle n tekin

2 pole motors are a big diff compared to 4 poles. Price is a huge diff. If kd really works. All the big brands would hv died.

Mayb u hv luck with it but a good motor need a good bearing n magnets.

What I meant by racing, is during racing we push the car n motor to the max n that's the time u can tell what's good n wats not.

But since hobbywing came out with their 4pole motors it cheap n good!


Quote:
Originally Posted by Chadworkz View Post
The KD36-74-1900kV (XL) Motor I have is in my Dad's E-Revo powered by an eZRun 80A ESC and a pair of Zippy Flightmax 30C 4S 2650mAh LiPo Batteries wired in parallel for a total of 4S-14.8V @ 5300mAh & 159A. The motor has a Turnigy Heatsink & Fan installed on it as well.

I have the truck geared for 38mph, which my Dad thinks is perfect for him, and there has never been a single problem with the truck or electronics. He drives hard and fast just like me, and we commonly run 5 or 6 charges through the trucks without many breaks.

The truck runs and performs great, so the KD motors can't be that bad. I also run the same setup in a 1/8 buggy, except the motor is a KD36-74-2800kV (XL), and it has performed flawlessly as well.


My Sponsors
Hobbywing
ManiaRc
Acorn racing
UpgradeRc
Blackbeard RC
Team Hong Nor
Team RC Monster
MoosRacing
BocaBearings
SweepRacing
Tresrey USA
   
Reply With Quote