Quote:
Originally Posted by zeropointbug
That labeling is horrible. Which diagrams are each person talking about? One is flipped around the other way.
The manufacturers diagram don't line up with the labels IMO. The big one is batt +, the one next to it is load +, and the far one is common ground... that's just the way I am reading it.
|
Even if it seems unconventional it makes sense to me that the larger size pad was made larger because it has to have 2 wires soldered on (B+ and P+), and that would leave the other two smaller pads to be single connections of B- and P- respecitvely.