RC-Monster Forums - View Single Post - dropped in LRP 1/8 motor and MMpro in hyper 7

snellemin · **dropped in LRP 1/8 motor and MMpro in hyper 7 -** 05.22.2010, 06:52 PM

I swapped the hardware from my son's hyper7 and used the MMPro, 3s2p LiFe Turnigy and 1/8 2500kv LRP motor. Timing is set at 0 degrees and running in smartsense. Runs pretty good and it will be used tomorrow at the LHS. Temps were ok last nite. I'll datalog it and take temps during the day. Need to get me a Ballistic 550 and see how it compares.

	(#1)
snellemin 2 KiloWatt RACER Offline Posts: 2,496 Join Date: May 2007 Location: Houston	dropped in LRP 1/8 motor and MMpro in hyper 7 - 05.22.2010, 06:52 PM I swapped the hardware from my son's hyper7 and used the MMPro, 3s2p LiFe Turnigy and 1/8 2500kv LRP motor. Timing is set at 0 degrees and running in smartsense. Runs pretty good and it will be used tomorrow at the LHS. Temps were ok last nite. I'll datalog it and take temps during the day. Need to get me a Ballistic 550 and see how it compares. 6 KiloWatt A123 Racer GTP-Pletty Big Maxximum+RX8. GTP-C50-6L Hacker+RX8. CRT.5-Pro4+ZTW esc. 24s2p EVG SX 49.6mph Ebike. 18s4p Raptor 60mph Ebike. 11.5KW