Quote:
Originally Posted by NickRummy
Did you use the RCM mount with your 1520?
|
Yes...of course
I used 4 small flat washers..2-3mm thick to prop up the center diff a bit which gave the motor about 5-7mm of clearance on the chassis..Have had no issues w/it at all.
1. MBX-6 T8 1900KV, RX8 ON 4S
2. MBX-5T 1520, MMM ON 5S
3. MBX-5 ONROAD CONVERSION 1515, MMM ON 5S
4. MRX-3 ON ROAD CONVERSION 1512, MMM ON 6S
5. TEN T 2650 T8, MMP ON 3S