RC-Monster Forums - View Single Post

jpoprock · 06.02.2010, 06:36 PM

Yeah, I was pretty sure they went on with pins, cuz the ones I got on eBay didn't come with them, so I used the ones that were already on there from the rotten prolines that I replaced.

Also MC, I think a little slop in the shock mount is to prevent the shafts from snapping with every little bump. I reead somewhere that if you keep them a kiss loose, you'll be less apt to snapping shafts if you bump something.

	(#249)
jpoprock "Don't act like you're not impressed." Offline Posts: 358 Join Date: Oct 2008 Location: Central Indiana	06.02.2010, 06:36 PM Yeah, I was pretty sure they went on with pins, cuz the ones I got on eBay didn't come with them, so I used the ones that were already on there from the rotten prolines that I replaced. Also MC, I think a little slop in the shock mount is to prevent the shafts from snapping with every little bump. I reead somewhere that if you keep them a kiss loose, you'll be less apt to snapping shafts if you bump something. ERBE: RCM 1/8 Hybrid Diffs, NEU 1515/2.5d/S MMM, 6S, Losi E-XXL CUSTOM, Neu1515 2.5d, MMM, 6s E-SLAYVO PRO ERevo Chassis w/ Pro 3.3 parts, NEU 1512, MMM, 4S.