RC-Monster Forums - View Single Post

Dafni · 03.19.2005, 07:21 AM

The jumpies are on the side with the input cables!
You don´t have to cut much of the shrink, but every controller looks a bit different.

The black shrink is nice indeed, but when you run it, the shrinkwrap will shrink some more, so that the cut-out section for the heatsink will become bigger and rounder. My experience.

Just have a look at your batts and wire it so that all cells will be in series. I think there´s a how-to thread here somewhere. But it´s really straight forward, just use common sense.

	(#2)
Dafni RC-Monster Mod Offline Posts: 2,487 Join Date: Feb 2005	03.19.2005, 07:21 AM The jumpies are on the side with the input cables! You don´t have to cut much of the shrink, but every controller looks a bit different. The black shrink is nice indeed, but when you run it, the shrinkwrap will shrink some more, so that the cut-out section for the heatsink will become bigger and rounder. My experience. Just have a look at your batts and wire it so that all cells will be in series. I think there´s a how-to thread here somewhere. But it´s really straight forward, just use common sense.