[el tomaso]

I have used the MMPro with great success in 1/8 buggies, and theyre only a couple of mild mods away from being a very good alternative. I take the fan wires out of the esc, and lengthen them to give constant flowing power from the receiver. That bring temps down to a down below 90f, then a novak 4-6s cap soldered to the power wires to be safe.

I have used this esc with a castle/neu 2650kv on 4s, with a hacker c50 13L on 5s, with a medusa 1600kv on 6s, and now the best setup, MMPro with tekin 1400kv, or 1350kv truggy on 6s.

The only time I had problems was in the medusa setup, thats when I did the fan mod, then it worked well.


Thomas G