RC-Monster Forums - View Single Post - Stretched e-Muggy (Baja-style) Build Thread

brian015 · 06.16.2010, 07:16 PM

Alright - I cut 2" off the front of the chassis (still need to cut last bit off) and attached front end and wheels/tires to see how it looks. The wheelbase is 20"; rear width is 19.5"; front width is 19"

So I still need to install the steering assembly and front brace, make the front extended cvd, install esc/bec, and install roll cage and wing. But I'm beginning to think I'm going to be driving this thing this summer.

	(#2)
brian015 RC-Monster Aluminum Offline Posts: 768 Join Date: Jul 2009 Location: NJ	06.16.2010, 07:16 PM Alright - I cut 2" off the front of the chassis (still need to cut last bit off) and attached front end and wheels/tires to see how it looks. The wheelbase is 20"; rear width is 19.5"; front width is 19" So I still need to install the steering assembly and front brace, make the front extended cvd, install esc/bec, and install roll cage and wing. But I'm beginning to think I'm going to be driving this thing this summer.