RC-Monster Forums - View Single Post - Is this a good emaxx braking system design

Sneeck · 02:32 PM

Picked up a new 8 spyder diff, send it over to mike for an adaptor plate, and design some center diff mount's in emachineshop who a friend cnc cut's out of high quality alum.

Total amount spend: under 100$.

Add another 40$ for custom length cvd's by rc alloy's if needed.

If you want this to be disc brake'd, you need a adaptor ring thingy for disc's on the output's of the diff and a system to activate the brake's, sorta like your idea. Add another 50$ or so for a quad disc brake set-up.

Can't get any better than this. Cept 2 speed. :004:

	(#22)
Sneeck RC-Monster Custom Offline Posts: 685 Join Date: Jul 2005 Location: Somewhere	02.20.2006, 02:30 PM Picked up a new 8 spyder diff, send it over to mike for an adaptor plate, and design some center diff mount's in emachineshop who a friend cnc cut's out of high quality alum. Total amount spend: under 100$. Add another 40$ for custom length cvd's by rc alloy's if needed. If you want this to be disc brake'd, you need a adaptor ring thingy for disc's on the output's of the diff and a system to activate the brake's, sorta like your idea. Add another 50$ or so for a quad disc brake set-up. Can't get any better than this. Cept 2 speed. :004: Eat My Dust! My Pictures More picture's Last edited by Sneeck; 02.20.2006 at 02:32 PM.