RC-Monster Forums - View Single Post - New Jammin SCRT project. carbon, 1/8 shocks, and mech brakes.

JoFreak · 06.20.2010, 03:37 AM

Hi, all the diff cups in the SCRT10 are without metal insert, many people have reportet that the outdrives in the front and rear start to woble after a while, not only the center.
Yes the outdrives and dogbones in the SCRT10 are smaller than the usual 1/8th stuff, at least smaller than the stuff I have/had. No idea on theCRT.5 though, but I wouldn't be surprised if the parts were the same size.
Purely theoretically I would have a neighbour who has a MP9, but they are impossible to get in touch with, so don't hold your breath...

You might want to get some captured rod ends for the steering (TRX2742X) as the stock ones are reported to pop of quite easily.

	(#2)
JoFreak RC-Monster Carbon Fiber Offline Posts: 447 Join Date: Feb 2009 Location: Munich	06.20.2010, 03:37 AM Hi, all the diff cups in the SCRT10 are without metal insert, many people have reportet that the outdrives in the front and rear start to woble after a while, not only the center. Yes the outdrives and dogbones in the SCRT10 are smaller than the usual 1/8th stuff, at least smaller than the stuff I have/had. No idea on theCRT.5 though, but I wouldn't be surprised if the parts were the same size. Purely theoretically I would have a neighbour who has a MP9, but they are impossible to get in touch with, so don't hold your breath... You might want to get some captured rod ends for the steering (TRX2742X) as the stock ones are reported to pop of quite easily.