RC-Monster Forums - View Single Post - How Best to Make This Damaged Hype 4s to 3s (pics)

Kcaz25 · 06.22.2010, 11:14 AM

Thanx BB16 but I think I want to tackle this one.

Bruce: I should have clarified. I tried everything within my power to save the other cell. It was puffing, leaking, not balancing with the other cells which were all 4.22 it was staying at 3.75V.

Also. I already seperated them. You can see in almost every picture where it goes from 4 cells to 3 cells.

So Mrchrash, all your saying is that I need to move the negative wire as the pic shows and solder up a 3s balance tab... Wait let me look at the pcb one more time.

	(#6)
Kcaz25 RC-Monster Titanium Offline Posts: 1,419 Join Date: Dec 2008 Location: Louisville, KY	06.22.2010, 11:14 AM Thanx BB16 but I think I want to tackle this one. Bruce: I should have clarified. I tried everything within my power to save the other cell. It was puffing, leaking, not balancing with the other cells which were all 4.22 it was staying at 3.75V. Also. I already seperated them. You can see in almost every picture where it goes from 4 cells to 3 cells. So Mrchrash, all your saying is that I need to move the negative wire as the pic shows and solder up a 3s balance tab... Wait let me look at the pcb one more time.