RC-Monster Forums - View Single Post - FS: Brushless Muggy, Hyperion EOS606i, 3PM 2.4, Turnigy 4S 5000, HiTec HS7954 Servo

Well, this is the last of my RC stuff. I'm getting out of the hobby completely, so please no RC trades, may entertain trades for other items, but NOTHING R/C.

First Up is my Losi Muggy.

It's a beast and I almost don't want to sell it, but I don't use it.

Muggy includes:

- Castle-Neu 2200 Motor w/ CC Blower
- MGM Com-Pro 160 w/PC Link
- Hitec HS945 MG Servo
- RC-Monster Motor Mount
- Losi Hardened Shocks
- Losi Aluminum Shock Caps
- Losi Ti-Nitrate Shock Shafts
- Losi Front Aluminum Lower Shock Mounts
- Aluminum Front Hubs
- Aluminum Front Carriers
- Losi Mud-Guards
- Ti-Nitrate Diff Ring/Pinion Gears Front/Rear
- Innovative-RC Aluminum Diff Cups Front/Center/Rear
- Losi Aluminum Diff Cases Front/Rear
- STRC Nutted Hinge Pins (All 4 Corners)
- Custom Aluminum Batter Tray
- 11T Novak Mod-1 Pinion
- Extra set of 17mm Wheel Hubs with a Set of Pro-Line Bowties
- Tons of Extra Parts, Diff Fluid, Pinions, Manual, etc.

Will Sell as a Roller without Motor/ESC, or with Motor/ESC.

Next up is some Misc Stuff:

First is a Hitec HS-7954SH High Voltage Ultra Torque Servo (333oz @ .15 sec - 6v / 403oz @ .12 sec - 7.4V)

Second is a Futaba 3PM 2.4GHz Radio with Receiver. The transmitter also has a 2100 3S LiPo.

Third is a Turnigy 5000 30C LiPo. Always charged/balanced on a Hyperion EOS0606i charger. Maybe 10 uses total on the battery.

Lastly is a Hyperion EOS0606i AC/DC Charger. Comes with a few Misc adapters.

	(#1)
F7Rider Guest Posts: n/a	FS: Brushless Muggy, Hyperion EOS606i, 3PM 2.4, Turnigy 4S 5000, HiTec HS7954 Servo - 06.22.2010, 03:56 PM Well, this is the last of my RC stuff. I'm getting out of the hobby completely, so please no RC trades, may entertain trades for other items, but NOTHING R/C. First Up is my Losi Muggy. It's a beast and I almost don't want to sell it, but I don't use it. Muggy includes: - Castle-Neu 2200 Motor w/ CC Blower - MGM Com-Pro 160 w/PC Link - Hitec HS945 MG Servo - RC-Monster Motor Mount - Losi Hardened Shocks - Losi Aluminum Shock Caps - Losi Ti-Nitrate Shock Shafts - Losi Front Aluminum Lower Shock Mounts - Aluminum Front Hubs - Aluminum Front Carriers - Losi Mud-Guards - Ti-Nitrate Diff Ring/Pinion Gears Front/Rear - Innovative-RC Aluminum Diff Cups Front/Center/Rear - Losi Aluminum Diff Cases Front/Rear - STRC Nutted Hinge Pins (All 4 Corners) - Custom Aluminum Batter Tray - 11T Novak Mod-1 Pinion - Extra set of 17mm Wheel Hubs with a Set of Pro-Line Bowties - Tons of Extra Parts, Diff Fluid, Pinions, Manual, etc. Will Sell as a Roller without Motor/ESC, or with Motor/ESC. Next up is some Misc Stuff: First is a Hitec HS-7954SH High Voltage Ultra Torque Servo (333oz @ .15 sec - 6v / 403oz @ .12 sec - 7.4V) Second is a Futaba 3PM 2.4GHz Radio with Receiver. The transmitter also has a 2100 3S LiPo. Third is a Turnigy 5000 30C LiPo. Always charged/balanced on a Hyperion EOS0606i charger. Maybe 10 uses total on the battery. Lastly is a Hyperion EOS0606i AC/DC Charger. Comes with a few Misc adapters.