RC-Monster Forums - View Single Post

hemiblas · 09:59 PM

Thats so crazy. This is almost exactly what happened to one of mine that got sent back. When I was running my Zippies on 6S and the 2200 motor, went to slow down and smoke starts coming out of the esc. It EsC didnt work after that. I wasnt overgeared either, if I remember I had calced it out to about 50mph on my emaxx so I took the gearing down when I went to 6S. I had to resolder the pack with the same issue. I dont run 6S on my MMM anymore and all has been well. But it might just be 6S and zippies. I'm pretty sure it was a V3 also. My MMM have been rock solid with the 7XL motor and the truerc 10C, 8000mah or the 8000mah SPC lipos both on 4S. The MMM combo with the 2200 and the SPCs have been fine too. On a side note, I did notice the other day that truerc had a warning against using the 8000mah 10C packs on the Castle 2200 motor.

	(#13)
hemiblas RC-Monster Carbon Fiber Offline Posts: 433 Join Date: Oct 2007	07.30.2010, 09:50 PM Thats so crazy. This is almost exactly what happened to one of mine that got sent back. When I was running my Zippies on 6S and the 2200 motor, went to slow down and smoke starts coming out of the esc. It EsC didnt work after that. I wasnt overgeared either, if I remember I had calced it out to about 50mph on my emaxx so I took the gearing down when I went to 6S. I had to resolder the pack with the same issue. I dont run 6S on my MMM anymore and all has been well. But it might just be 6S and zippies. I'm pretty sure it was a V3 also. My MMM have been rock solid with the 7XL motor and the truerc 10C, 8000mah or the 8000mah SPC lipos both on 4S. The MMM combo with the 2200 and the SPCs have been fine too. On a side note, I did notice the other day that truerc had a warning against using the 8000mah 10C packs on the Castle 2200 motor. Last edited by hemiblas; 07.30.2010 at 09:59 PM.