RC-Monster Forums - View Single Post - Got my first HK,Turnigy Lipos. Doesn't look good....

hemiblas · 09:05 PM

One of the cells would still be good. If you save it and keep the deans on it then when you get the extra 2s pack, you could use it to run 5S in your truck. You would just put all the cells in series. its still a 40C 5000mah cell thats in there. There is not much risk to taking that pack apart and just pulling the bad cell off.

5S is a sweet spot for the MMM. If you gear it down to the same speed on 4S your motor and speed control will run cooler, plus you dont have to push the MMM to the limit at 6S.

	(#55)
hemiblas RC-Monster Carbon Fiber Offline Posts: 433 Join Date: Oct 2007	08.07.2010, 08:52 PM One of the cells would still be good. If you save it and keep the deans on it then when you get the extra 2s pack, you could use it to run 5S in your truck. You would just put all the cells in series. its still a 40C 5000mah cell thats in there. There is not much risk to taking that pack apart and just pulling the bad cell off. 5S is a sweet spot for the MMM. If you gear it down to the same speed on 4S your motor and speed control will run cooler, plus you dont have to push the MMM to the limit at 6S. Last edited by hemiblas; 08.07.2010 at 09:05 PM.