RC-Monster Forums - View Single Post

sikeston34m · 08.15.2010, 06:09 PM

Uh oh............Now I'm in trouble. LOL

I once did a Direct Drive to Diff E Revo. Here's the thread on it. A long read, but you will see the challenges I faced.

http://www.rc-monster.com/forum/show...outrunner+Revo

With Direct Drive using such a large Diff ratio has it's problems. I also tried the 10/43 Buggy gears for the Revo, and they wouldn't hold up. The Torque was too much for the diffs to handle.

The E maxx has the same gear ratio as the Revo.

I can see in the future, a working outrunner project, but this is waiting on Castle HV Line of Mamba Controllers.

A low kv outrunner on HV, would startup great and haul butt with top speed.

Anticipation. LOL

	(#6)
sikeston34m RC-Monster Brushless Offline Posts: 2,085 Join Date: Sep 2007	08.15.2010, 06:09 PM Uh oh............Now I'm in trouble. LOL I once did a Direct Drive to Diff E Revo. Here's the thread on it. A long read, but you will see the challenges I faced. http://www.rc-monster.com/forum/show...outrunner+Revo With Direct Drive using such a large Diff ratio has it's problems. I also tried the 10/43 Buggy gears for the Revo, and they wouldn't hold up. The Torque was too much for the diffs to handle. The E maxx has the same gear ratio as the Revo. I can see in the future, a working outrunner project, but this is waiting on Castle HV Line of Mamba Controllers. A low kv outrunner on HV, would startup great and haul butt with top speed. Anticipation. LOL