RC-Monster Forums - View Single Post - faceplate swap Neu-Castle 2200 and Flux Tork 2200?

ozzynichols · **faceplate swap Neu-Castle 2200 and Flux Tork 2200? -** 08.26.2010, 02:24 PM

Hey Guys, New here, been on Traxxas and Savage-Central forums for a while. Both the Neu-Castle 2200Kv (green, not black) motor in my E-Revo and the Tork 2200Kv motor in my Savage Flux have had prob 100 runs each, mostly in sand and dirt, so I'm gonna open them and clean/lube them since they're both out of warranty.
My question is can I swap the faceplates? My E-revo motor mounts using the faceplate but only has 4 holes (only 2 that I can use), yet my savage motor mounts using clamps and has 12 holes in the unused faceplate. I could sure use that faceplate to better mount my e-revo motor. If there is a link to a tutorial on rebuilding these motors Please let me know, thanks.

	(#1)
ozzynichols RC-Monster Stock Offline Posts: 3 Join Date: May 2010	faceplate swap Neu-Castle 2200 and Flux Tork 2200? - 08.26.2010, 02:24 PM Hey Guys, New here, been on Traxxas and Savage-Central forums for a while. Both the Neu-Castle 2200Kv (green, not black) motor in my E-Revo and the Tork 2200Kv motor in my Savage Flux have had prob 100 runs each, mostly in sand and dirt, so I'm gonna open them and clean/lube them since they're both out of warranty. My question is can I swap the faceplates? My E-revo motor mounts using the faceplate but only has 4 holes (only 2 that I can use), yet my savage motor mounts using clamps and has 12 holes in the unused faceplate. I could sure use that faceplate to better mount my e-revo motor. If there is a link to a tutorial on rebuilding these motors Please let me know, thanks.