RC-Monster Forums - View Single Post

Gustav · 03:50 PM

IMO it won't be near heavy enough for a 2250,a 1950 on 6s will be extreme already( go for a 1600 to 1800kv for 6s).Either a 36120 or a 3695 would be good ( no need to go over 42000 rpm) or the MGM 16024.

What's the diff ratio?

@squee,it won't need a very big pinion, to hit about 65 mph with 3.3:1 diffs and 40000 rpm is around 16/51(somewhere in that ballpark)

EDIT;nl12,get in touch with Mike for a spur adapter,he'll likely make you an adapter for the 51T spur.

	(#4)
Gustav RC-Monster Aluminum Offline Posts: 916 Join Date: Jul 2005 Location: UK	02.25.2006, 03:42 PM IMO it won't be near heavy enough for a 2250,a 1950 on 6s will be extreme already( go for a 1600 to 1800kv for 6s).Either a 36120 or a 3695 would be good ( no need to go over 42000 rpm) or the MGM 16024. What's the diff ratio? @squee,it won't need a very big pinion, to hit about 65 mph with 3.3:1 diffs and 40000 rpm is around 16/51(somewhere in that ballpark) EDIT;nl12,get in touch with Mike for a spur adapter,he'll likely make you an adapter for the 51T spur. Last edited by Gustav; 02.25.2006 at 03:50 PM.