Will do Alien, Progress pics. Got them Wired up, and all the startup wiring done so the thing actually arms...
Great guide for the HP #194989 and HP #280127 can be found here:
CLICK ME
Have yet to put a load on it, or plug it in yet, need connectors to go to my load of choice (700watt amp and dual 8in subs)
Progress Pics:
Grounding the (PS_enable), (PS_interlock) and (PS_kill) signal pins
12Ga Power Leads attached, Negatives on the outside, large 12v rail in the center
Ran the 2nd (PSU_Interlock_2) Pin to +12v
They are complete
