RC-Monster Forums - View Single Post - elc. conversion project done right... with an 808

whitrzac · 09.07.2010, 08:32 PM

in 3 weeks I went from middle of the B to 2nd qualifier in the 1/8 class...

has there been any solution to the rear pinion bearing problems? I'v had to replace mine every other week

the MMP+1400+5s 4100mah combo has been getting me 15min but the pack is D E A D after that race... I would bump it to 6s, but finding a 4100mah EP neu cell is proving a little difficult

...

buggy wights 3498g with my 4100 5s, and 3443g with my 6s 2650mah

AKA 7.7lbs, and 7.6lbs

I could easily drop another 1/2lb if I would clean it, get a new body(covered in shoogoo) and spend some time/$$ lightening a few parts...

	(#57)
whitrzac Can't catch this... Offline Posts: 1,142 Join Date: Oct 2008 Location: baraboo, WI	09.07.2010, 08:32 PM in 3 weeks I went from middle of the B to 2nd qualifier in the 1/8 class... has there been any solution to the rear pinion bearing problems? I'v had to replace mine every other week the MMP+1400+5s 4100mah combo has been getting me 15min but the pack is D E A D after that race... I would bump it to 6s, but finding a 4100mah EP neu cell is proving a little difficult... buggy wights 3498g with my 4100 5s, and 3443g with my 6s 2650mah AKA 7.7lbs, and 7.6lbs I could easily drop another 1/2lb if I would clean it, get a new body(covered in shoogoo) and spend some time/$$ lightening a few parts...