Quote:
Originally Posted by Jahay
neil, i know i do not have any dead cells as a friend checked it on his multimeter. (i dont have one though)
BB16, if i was in the states i definitely would send you my hyperion to have a look at it, but considering im in the UK and need the lipo this weekend to run, i think i need to do it myself...
When you say the "front board" opposite the battery leads... which part do you mean? because i have battery leads on either end of my lipos which is different to all my other lipos.
I believe the damage was caused by a massive nose dive :( so i need this repaired...
Thing is, i cannot see any breaks or cracks in the solder... maybe i am not looking at the right place...
You do not by any chance have a pic you could post up? otherwise when i get home, ill post one for you to point out the area you are talking about...
Thanks for the responses guys.
|
Take the heatshrink off the pack, the end that does not have the wires coming out.. Check all the older joints and the board.
My board was craked and bent... which pulled one of the solder joints apart..
Reflow all of the solder joints to ensure a good connection.