RC-Monster Forums - View Single Post

Finnster · 09.30.2010, 03:23 PM

*** I was referring to the integy uggy hex hubs earlier.

IDK about the Savage ones. The only concern I would have would be what they are using as a sleeve for the axle threads, esp for such a large offset. I had ofna hex adapters for the revo way back when and the steel threads ate into the soft alu of the hub and eventually caused wobbling. I eventually made my own sleeve for the threads from 7075 tubing, but never tested it long term to see if would hold up better.

	(#13)
Finnster KillaHurtz Offline Posts: 2,958 Join Date: Apr 2006 Location: Bucks Co, PA	09.30.2010, 03:23 PM *** I was referring to the integy uggy hex hubs earlier. IDK about the Savage ones. The only concern I would have would be what they are using as a sleeve for the axle threads, esp for such a large offset. I had ofna hex adapters for the revo way back when and the steel threads ate into the soft alu of the hub and eventually caused wobbling. I eventually made my own sleeve for the threads from 7075 tubing, but never tested it long term to see if would hold up better.