RC-Monster Forums - View Single Post - E-Revo dewalt conversion

josh9mille · 04:44 PM

I dont know if using the 18v motor will gain anything at all, but likely not. I think using the 12v motor and pushing 18 volts through it by running 5s lipo would be your best bet because i think overvolting the 12v would produce more rpms than the other motor on 18v. I only ran 4s on mine but i know a few people were running 5s with the stock speed control with good results and as far as i know havent burnt a dewalt motor up yet

	(#4)
josh9mille RC-Monster Aluminum Offline Posts: 897 Join Date: Mar 2010 Location: Same town as "Brand P"	10.13.2010, 04:38 PM I dont know if using the 18v motor will gain anything at all, but likely not. I think using the 12v motor and pushing 18 volts through it by running 5s lipo would be your best bet because i think overvolting the 12v would produce more rpms than the other motor on 18v. I only ran 4s on mine but i know a few people were running 5s with the stock speed control with good results and as far as i know havent burnt a dewalt motor up yet Built Ford tough, with Chevy stuff. Last edited by josh9mille; 10.13.2010 at 04:44 PM.