[Overdriven]

Yes I ran a single 14v. I've had thoughts about running 2 just for shits and giggles, but I kinda doubt the evx2 will handle it. If I ever get the time to make a mount and another motor I might try it on my MMM. Run time (battery life) on the dewalts is similar to the titans from what I remember on NiMh, maybe a couple minutes longer, not much tho. For gearing start out at 21t or 22t pinion and 65t spur. If you want more speed swap to a 62t spur. Just watch the esc temps, but in this weather the esc should be fine with the 22/62 combo.

It seems like Im one of the lucky ones when it comes to the drivetrain of my erevo. I've never broken anything except for one rear diff and that was after lots of abuse from a variety of motor setups. And it stood up to the 1520 on 6s lipo for quite awhile too. But dual dewalts would be just as tough on parts, and therefore alot of fun! I've actually been collecting parts for an Emaxx based 1/6 scale that will be a no nonsense allweather basher. Dual dewalts are under consideration due to price, durability and the not caring about overheating them factor.