RC-Monster Forums - View Single Post

KniteWulfe · 01:46 AM

I normally run no punch control but I tried 25%

Here are the graphs. Keep in mind that last huge voltage dip was in a chicane not on a straight. My LVC was set to 3.1 V/cell for this test. I also tried firmware 1.29 for this test and aside from maxing out at 138A instead of my usual 110-120 the results were the same as 1.24.

Volts

Amps

And the moment of shutdown including that huge drop in voltage:

	(#36)
KniteWulfe RC-Monster Carbon Fiber Offline Posts: 51 Join Date: Sep 2010	10.18.2010, 01:13 AM I normally run no punch control but I tried 25% Here are the graphs. Keep in mind that last huge voltage dip was in a chicane not on a straight. My LVC was set to 3.1 V/cell for this test. I also tried firmware 1.29 for this test and aside from maxing out at 138A instead of my usual 110-120 the results were the same as 1.24. Volts Amps And the moment of shutdown including that huge drop in voltage: Last edited by KniteWulfe; 10.18.2010 at 01:46 AM.