RC-Monster Forums - View Single Post

kingdomracer · 10.19.2010, 08:23 PM

Well I said I would post up my results of adding a CC BEC to a 4s setup using the MMP/1512 1800kv with a HiTec 7945TH which is known to need more amps at stall which the MMP ESC internal BEC cannot deliver.

I installed the CC BEC straight to the servo and just brought the ground and signal wire back to the receiver in a Y adapter.

I am still using the MMP BEC to power the radio and transponder. So all three wires from the ESC are plugged into receiver.

Glitch is gone

Now only if Castle would include this in their CC BEC instructions for those of us using HV servos

	(#48)
kingdomracer RC-Monster Carbon Fiber Offline Posts: 52 Join Date: Jul 2009	10.19.2010, 08:23 PM Well I said I would post up my results of adding a CC BEC to a 4s setup using the MMP/1512 1800kv with a HiTec 7945TH which is known to need more amps at stall which the MMP ESC internal BEC cannot deliver. I installed the CC BEC straight to the servo and just brought the ground and signal wire back to the receiver in a Y adapter. I am still using the MMP BEC to power the radio and transponder. So all three wires from the ESC are plugged into receiver. Glitch is gone Now only if Castle would include this in their CC BEC instructions for those of us using HV servos JESUS says "Fix it B4 it Breaks"