RC-Monster Forums - View Single Post - E-Maxx BL suggest diffs and bulkheads?

RC Fan 4 Life · 08:25 AM

The hybrids should be fine, i just don't understand though because FLM says to use

Hot Bodies diff part #s. Diff c8084-1 and Pinion c8030

Part # c8084-1 can not be found and you use the same diffs and pinion in both rear and front correct?

I would like to see a guide or something on the install before i bought them they look harder to install than on a diff that splits into and i have found some post where people have had trouble on the install.

Klausen: is the GA diff case and FLM51000 the only two things needed?

Thanks again for the help.

	(#9)
RC Fan 4 Life RC-Monster Carbon Fiber Offline Posts: 87 Join Date: Jan 2006	11.12.2010, 08:06 AM The hybrids should be fine, i just don't understand though because FLM says to use Hot Bodies diff part #s. Diff c8084-1 and Pinion c8030 Part # c8084-1 can not be found and you use the same diffs and pinion in both rear and front correct? I would like to see a guide or something on the install before i bought them they look harder to install than on a diff that splits into and i have found some post where people have had trouble on the install. Klausen: is the GA diff case and FLM51000 the only two things needed? Thanks again for the help. Last edited by RC Fan 4 Life; 11.12.2010 at 08:25 AM.