RC-Monster Forums - View Single Post - My e-revo brushless edition build

mistercrash · 03:09 PM

Now this is cool, I just modified a stock axle carrier to accept a 15X21 inner bearing and a 8X16 outer bearing so the LST XXL shafts could be used with the stock axle carriers. The 15X21 bearing presses right in using a 5/8'' socket and a vise. The opening for the outer bearing has to be enlarged to accept the 8X16 bearing. This brings the total cost of parts needed way down. I'll post pics this weekend.

I made a mistake when I listed the materials for this mod, I wrote that the outer bearing was 8X15 but it is really 8X16.

	(#684)
mistercrash Guelph, Canada, eh! Offline Posts: 1,083 Join Date: Sep 2007 Location: Guelph, Ontario, Canada	11.12.2010, 03:06 PM Now this is cool, I just modified a stock axle carrier to accept a 15X21 inner bearing and a 8X16 outer bearing so the LST XXL shafts could be used with the stock axle carriers. The 15X21 bearing presses right in using a 5/8'' socket and a vise. The opening for the outer bearing has to be enlarged to accept the 8X16 bearing. This brings the total cost of parts needed way down. I'll post pics this weekend. I made a mistake when I listed the materials for this mod, I wrote that the outer bearing was 8X15 but it is really 8X16. No brain, no headaches. Last edited by mistercrash; 11.12.2010 at 03:09 PM.