RC-Monster Forums - View Single Post - Help creating a low budget Hyper 7 brushless

DrKnow65 · 11.27.2010, 11:47 PM

Have a quick request from guys who run 1/8th brushless buggies....

I've settled on a 6S/1580/MMM setup, question I have is wieght VS runtime, i.e. I'm looking at either 2x3S5000 in series at ~2lbs -or- 2x6S4000 parallel at 2.8lbs
Basically it's 5ah at 2lbs, or 8ah at 2.8... is the extra .8lbs worth a 40% increase in capacity. Total wieght (just a quick calc w/o all the parts assembled yet) 5ah= 10.4lbs, 8ah= 11.2lbs

	(#12)
DrKnow65 RC-Monster Aluminum Offline Posts: 998 Join Date: Oct 2007 Location: Colorado	11.27.2010, 11:47 PM Have a quick request from guys who run 1/8th brushless buggies.... I've settled on a 6S/1580/MMM setup, question I have is wieght VS runtime, i.e. I'm looking at either 2x3S5000 in series at ~2lbs -or- 2x6S4000 parallel at 2.8lbs Basically it's 5ah at 2lbs, or 8ah at 2.8... is the extra .8lbs worth a 40% increase in capacity. Total wieght (just a quick calc w/o all the parts assembled yet) 5ah= 10.4lbs, 8ah= 11.2lbs If I could only draw what I see in my head, then afford to build it, and finaly get to play with it...