RC-Monster Forums - View Single Post

brijar · 11.29.2010, 10:37 AM

A123 cells charge to 3.6v per cell, but drop very quickly to 3.3v per cell after a load is applied, so it should only be about 16.5v for a 5s pack a few seconds into the run. I have heard that people can run 5s and even 6s lipo on a Mama Max, though I don't know what it takes to do that. I should have mentioned before that I do have an external BEC that I will use. To disable the MM's BEC, do I just cut or unplug the red wire going to the RX?

	(#3)
brijar Knowing You're Hooked on RC: Priceless... Offline Posts: 271 Join Date: Feb 2006 Location: Blue Springs (KC) MO	11.29.2010, 10:37 AM A123 cells charge to 3.6v per cell, but drop very quickly to 3.3v per cell after a load is applied, so it should only be about 16.5v for a 5s pack a few seconds into the run. I have heard that people can run 5s and even 6s lipo on a Mama Max, though I don't know what it takes to do that. I should have mentioned before that I do have an external BEC that I will use. To disable the MM's BEC, do I just cut or unplug the red wire going to the RX? REVO 3.3 Conversion: 3906 trans, CC 1518, MMM, 6s Gens Ace 5k 40C, LST Diffs, Summit shafts Slash 2x4 LCG Two Slash 4x4s Rustler