View Single Post
Old
  (#2)
sikeston34m
RC-Monster Brushless
 
sikeston34m's Avatar
 
Offline
Posts: 2,085
Join Date: Sep 2007
12.04.2010, 01:21 PM

Uh Oh!

OK, next step I would do is:

Remove the lower skid plate. <----part that protect the tranny on the bottom

Then I would disconnect the front and rear driveshafts from the tranny

This will help you figure out what's locking up.

If the tranny input shaft turns freely, then it's not the tranny.

It could be one of the diffs.

I hope this helps you figure out what the problem is.

First, I would check for a rock stuck in one of the wheels or A-arms. I've had this happen before too.

Good Luck!
   
Reply With Quote