RC-Monster Forums - View Single Post

Thomas Porfert · 12.07.2010, 01:40 PM

This is something that has been discussed but probably won't be included with the initial release, but could be easily be added with a firmware update. It is already a feature on the ICE controllers, so the software is capable of doing it, we would just need to figure out what throttle sequence would clear the data.

Turning it on at full reverse is one option, but if someone has their throttle signal reversed it could get confusing if they're doing throttle calibration; the chiming the controller makes when it's clearing the data could be confused with the full throttle calibration chimes. But I think this would be a very rare occurrence and easily troubleshot.

This may be something that Richard has already added, I'll double check at the tech support/engineering meeting on Thursday. Thanks!

Thomas Porfert
Tech Support
Castle Creations

	(#6)
Thomas Porfert RC-Monster Carbon Fiber Offline Posts: 301 Join Date: Feb 2008	12.07.2010, 01:40 PM This is something that has been discussed but probably won't be included with the initial release, but could be easily be added with a firmware update. It is already a feature on the ICE controllers, so the software is capable of doing it, we would just need to figure out what throttle sequence would clear the data. Turning it on at full reverse is one option, but if someone has their throttle signal reversed it could get confusing if they're doing throttle calibration; the chiming the controller makes when it's clearing the data could be confused with the full throttle calibration chimes. But I think this would be a very rare occurrence and easily troubleshot. This may be something that Richard has already added, I'll double check at the tech support/engineering meeting on Thursday. Thanks! Thomas Porfert Tech Support Castle Creations