RC-Monster Forums - View Single Post - My e-revo brushless edition build

ZippyBasher · 12.13.2010, 01:45 PM

Mr. Crash, You would be able to tell me the Distance between the Stock holes on the Axle? From where the CVD Pin goes through the axle to where the Hex Pin goes through the axle? And distance between the hole you drilled in the axle and CVD Pin hole.? And Lastly. Length of your CVD Pin to Pin. I have been tinkering with some 17mm Hubs and 8mm Axles. I appreciate your time...

Thank You Sir...

	(#1)
ZippyBasher 8th scale Stunt-Driver/Mechanic Offline Posts: 441 Join Date: Dec 2008 Location: SoCal	12.13.2010, 01:45 PM Mr. Crash, You would be able to tell me the Distance between the Stock holes on the Axle? From where the CVD Pin goes through the axle to where the Hex Pin goes through the axle? And distance between the hole you drilled in the axle and CVD Pin hole.? And Lastly. Length of your CVD Pin to Pin. I have been tinkering with some 17mm Hubs and 8mm Axles. I appreciate your time... Thank You Sir... Maxx - FLM, MMM, CD Med.36x706s Raja - FLM Ext. MM, 1512, 4s SC8ight - MMM, 1520, 6s D8T - MMM 1717 6s My OVERPOWERED Rides "CLICK" Like Playing Cards? Cut-Throat Rummy "CLICK"