RC-Monster Forums - View Single Post

simplechamp · 03:29 AM

Always base a full charge on voltage being 4.2V/cell.

My Zippy 5000mah packs will take more than 5000mah back in to reach 4.2V/cell after being fully discharged to 3.0V/cell. If I only allow the charger to put 5000mah back in they wouldn't reach 4.2V/cell and might only get to say 4.17V/cell

So I would have to disagree what's_nitro, I don't think 3.0V/cell is way over-discharged, and mine will take more than 5000mah according to the charger.

	(#3)
simplechamp RC-Monster Titanium Offline Posts: 1,884 Join Date: Jul 2009	12.17.2010, 03:28 AM Always base a full charge on voltage being 4.2V/cell. My Zippy 5000mah packs will take more than 5000mah back in to reach 4.2V/cell after being fully discharged to 3.0V/cell. If I only allow the charger to put 5000mah back in they wouldn't reach 4.2V/cell and might only get to say 4.17V/cell So I would have to disagree what's_nitro, I don't think 3.0V/cell is way over-discharged, and mine will take more than 5000mah according to the charger. Caster Fusion F8T - Serpent 811Be - Jammin X2 carbon e-GT conversion - Axial SCX10 Last edited by simplechamp; 12.17.2010 at 03:29 AM.