RC-Monster Forums - View Single Post

RC-NUT · **FLM 1717 Converted Savage 25 -** 12.31.2010, 11:13 PM

Here is my first savage conversion. I still need to mount the batteries, upgrade the shocks, and possibly support the back of that motor. I don't feel to confident with the weight of that 1717 and the way the KD Gen 2 tranny is mounted. I had to have the tranny post machined to adapt the 4mm screws on the 1717.

I have about 10 runs with a CC1518 motor on 4s and the truck was a blast. This should be a new ball game.

- CC 1717 motor
- MMM ESC
- Futaba 3PM radio
- Turnigy 40c 5000 3s lipos
- Kershaw Gen 2 direct drive tranny
- FLM chassis
- HPI bullet proof diffs
- Lots of aluminum

	(#1)
RC-NUT RC-Monster Carbon Fiber Offline Posts: 121 Join Date: Oct 2006 Location: SANDOWN, NH	FLM 1717 Converted Savage 25 - 12.31.2010, 11:13 PM Here is my first savage conversion. I still need to mount the batteries, upgrade the shocks, and possibly support the back of that motor. I don't feel to confident with the weight of that 1717 and the way the KD Gen 2 tranny is mounted. I had to have the tranny post machined to adapt the 4mm screws on the 1717. I have about 10 runs with a CC1518 motor on 4s and the truck was a blast. This should be a new ball game. - CC 1717 motor - MMM ESC - Futaba 3PM radio - Turnigy 40c 5000 3s lipos - Kershaw Gen 2 direct drive tranny - FLM chassis - HPI bullet proof diffs - Lots of aluminum Attached Thumbnails