RC-Monster Forums - View Single Post - SH Z-Car ZMXB-8 1/8 Buggy

el tomaso · 01:36 PM

I ended up with MMPro and castle/neu 1512 1800kv, on 5s with mec brakes front and rear. I am going to try the 1518 too, just not at first

The mount and tray is RCM, and I have moved the rear brace over to the left side with some modding, this way I have no problems with small pinions. I am using the springs from a hyper 8,5 PRO with the ofna upper spring retainer over the stock spring cup(or what its name is), as adviced in this thread. Much better damping/spring ratio IMO.

If the snow will melt and evaporate, maybe one day I can drive this car too

Here are some low quality pics(long overdue, sorry), of the car almost finished. The wiring will be dealt with, I assure you

That is my little schnauser drinking in the background

Thomas G

	(#164)
el tomaso RC-Monster Carbon Fiber Offline Posts: 283 Join Date: Feb 2010	01.04.2011, 01:24 PM I ended up with MMPro and castle/neu 1512 1800kv, on 5s with mec brakes front and rear. I am going to try the 1518 too, just not at first The mount and tray is RCM, and I have moved the rear brace over to the left side with some modding, this way I have no problems with small pinions. I am using the springs from a hyper 8,5 PRO with the ofna upper spring retainer over the stock spring cup(or what its name is), as adviced in this thread. Much better damping/spring ratio IMO. If the snow will melt and evaporate, maybe one day I can drive this car too Here are some low quality pics(long overdue, sorry), of the car almost finished. The wiring will be dealt with, I assure you That is my little schnauser drinking in the background Thomas G I have the cars that I really wanted before I got them ;-) Last edited by el tomaso; 01.04.2011 at 01:36 PM.