RC-Monster Forums - View Single Post

DrKnow65 · 01.05.2011, 10:36 AM

I was considering using some dielectric grease on my CC 6.5mm bullets. Partly because they are so difficult to connect and disconnect but also to see if it helped any with the sparking. I also have considered using a sacrificial connector to save my 6.5's, I have some mini-deans I've been using for my servo's and BEC that could be piggy backed on my battery/motor leads.

I'll give it all a try when my MM XL shows up and I pull out the MMM.

	(#19)
DrKnow65 RC-Monster Aluminum Offline Posts: 998 Join Date: Oct 2007 Location: Colorado	01.05.2011, 10:36 AM I was considering using some dielectric grease on my CC 6.5mm bullets. Partly because they are so difficult to connect and disconnect but also to see if it helped any with the sparking. I also have considered using a sacrificial connector to save my 6.5's, I have some mini-deans I've been using for my servo's and BEC that could be piggy backed on my battery/motor leads. I'll give it all a try when my MM XL shows up and I pull out the MMM. If I could only draw what I see in my head, then afford to build it, and finaly get to play with it...