RC-Monster Forums - View Single Post - bec, servos, and any help would be great!

DrKnow65 · 01.07.2011, 10:51 AM

Cham, the CC BEC is a good unit but you may want to go with the CC Pro BEC, it has a higher "S" limit just in case you go with a higher voltage brushless setup in the future. You can find the pro on the Castle site. As far as setting the voltage, that is done via the castle link you use for programming the MMM. The BEC will come with instructions on how it gets wired in, but if you need specific help feel free to post up your questions (and pics usually help getting accurate answers after you have the parts in place).

As for a charger I would say to keep the one you have and build a power supply for home use. Do a search for "building a power supply" :-) good cheap solutions to be had...

	(#3)
DrKnow65 RC-Monster Aluminum Offline Posts: 998 Join Date: Oct 2007 Location: Colorado	01.07.2011, 10:51 AM Cham, the CC BEC is a good unit but you may want to go with the CC Pro BEC, it has a higher "S" limit just in case you go with a higher voltage brushless setup in the future. You can find the pro on the Castle site. As far as setting the voltage, that is done via the castle link you use for programming the MMM. The BEC will come with instructions on how it gets wired in, but if you need specific help feel free to post up your questions (and pics usually help getting accurate answers after you have the parts in place). As for a charger I would say to keep the one you have and build a power supply for home use. Do a search for "building a power supply" :-) good cheap solutions to be had... If I could only draw what I see in my head, then afford to build it, and finaly get to play with it...