RC-Monster Forums - View Single Post - Computer supplys for charger power question

BrianG · 01.09.2011, 05:39 PM

Usually, the 5v line is the one to use, but it can't hurt to try the 3.3v line too.

The "feedback" line wire color will be the same color as the rail it is monitoring (yellow for 12v), just smaller - if it exists. And they are separate wires, but are tied together at the motherboard connector - not a separate pin in that connector.

	(#4)
BrianG RC-Monster Admin Offline Posts: 14,609 Join Date: Nov 2005 Location: Des Moines, IA	01.09.2011, 05:39 PM Usually, the 5v line is the one to use, but it can't hurt to try the 3.3v line too. The "feedback" line wire color will be the same color as the rail it is monitoring (yellow for 12v), just smaller - if it exists. And they are separate wires, but are tied together at the motherboard connector - not a separate pin in that connector.