RC-Monster Forums - View Single Post

J57ltr · 01.26.2011, 08:58 PM

It's easier if you don't use a 118 degree bit since they tend to grab. It will work, but are you actually using plexiglass? I ask because a lot of people call every clear plastic plexiglass. For plastics I use 90 degree bits or for larger holes (1/2" or larger) use a Forstner but too keep it from cracking. We do lots of plastics from lexan to plexi to acrylic (the most difficult) and they work great on them.

Jeff

	(#12)
J57ltr RC-Monster Aluminum Offline Posts: 610 Join Date: Feb 2009 Location: Tomball/ Houston Tx.	01.26.2011, 08:58 PM It's easier if you don't use a 118 degree bit since they tend to grab. It will work, but are you actually using plexiglass? I ask because a lot of people call every clear plastic plexiglass. For plastics I use 90 degree bits or for larger holes (1/2" or larger) use a Forstner but too keep it from cracking. We do lots of plastics from lexan to plexi to acrylic (the most difficult) and they work great on them. Jeff The Warnings & Cautions discussed in this manual cant cover all possible conditions/situations. It must be understood that common sense and caution are factors which cant be built into this product.