RC-Monster Forums - View Single Post

TexasSP · **Outrunner to diff in SCX10 -** 01.29.2011, 04:28 PM

I am thinking of doing a straight to diff outrunner in an SCX10.

I want to keep COG low which is one reason, and to eliminate the trans is the other. I will also mount battery plates on either side of it. I actually think I can keep everything down low if I do it right.

I will be using a mamba pro and really not set on voltage yet.

I want good low speed driving but be able to get up to 15 mph or so too.

Anyone with outrunner experience have any suggestions on what motor. I don't want anything too expensive either.

I will custom make my own mount from aluminum.

	(#1)
TexasSP Something, anything, nothing Offline Posts: 2,747 Join Date: Mar 2006 Location: Houston, TX	Outrunner to diff in SCX10 - 01.29.2011, 04:28 PM I am thinking of doing a straight to diff outrunner in an SCX10. I want to keep COG low which is one reason, and to eliminate the trans is the other. I will also mount battery plates on either side of it. I actually think I can keep everything down low if I do it right. I will be using a mamba pro and really not set on voltage yet. I want good low speed driving but be able to get up to 15 mph or so too. Anyone with outrunner experience have any suggestions on what motor. I don't want anything too expensive either. I will custom make my own mount from aluminum. www.cubicle101.com A friends comic strip website.