RC-Monster Forums - View Single Post

DrKnow65 · 01.30.2011, 01:55 PM

Yah, the highest load you'll see is just as the vehicle starts moving. If you have a volt meter you can probe on either side of the connector (just push the leads into the backside of the connector on one wire at a time) and look for a voltage drop when you load the motor holding the car in place. Just don't do it too long and overheat anything.

Hope that makes sense.

	(#4)
DrKnow65 RC-Monster Aluminum Offline Posts: 998 Join Date: Oct 2007 Location: Colorado	01.30.2011, 01:55 PM Yah, the highest load you'll see is just as the vehicle starts moving. If you have a volt meter you can probe on either side of the connector (just push the leads into the backside of the connector on one wire at a time) and look for a voltage drop when you load the motor holding the car in place. Just don't do it too long and overheat anything. Hope that makes sense. If I could only draw what I see in my head, then afford to build it, and finaly get to play with it...