RC-Monster Forums - View Single Post

DrKnow65 · 01.30.2011, 11:36 PM

A 1518, and he'll yes I have to use some limiting to control it. But that's the general idea, over build and under use. It should run like a top without being stressed at all.

Thanks to the data logging from when it was in the Hyper7 I figure it will run a 20 minute main on 2x 2650mah 4s lipo's at 640gr for the pair.

I may size down the motor with another castle/neu at some point, something lower kv so I don't run close to the RPM limit.

	(#472)
DrKnow65 RC-Monster Aluminum Offline Posts: 998 Join Date: Oct 2007 Location: Colorado	01.30.2011, 11:36 PM A 1518, and he'll yes I have to use some limiting to control it. But that's the general idea, over build and under use. It should run like a top without being stressed at all. Thanks to the data logging from when it was in the Hyper7 I figure it will run a 20 minute main on 2x 2650mah 4s lipo's at 640gr for the pair. I may size down the motor with another castle/neu at some point, something lower kv so I don't run close to the RPM limit. If I could only draw what I see in my head, then afford to build it, and finaly get to play with it...