RC-Monster Forums - View Single Post - Need help from every member with a truggy!!!

simplechamp · 02:18 AM

Went to go measure a spare arm from my Caster F8T, but the inner hingepin is a solid tube the whole way through, and you need it to be open? Mugen MBX5T/6T is the same way. Well, here are the measurements for the F8T anyway.

Inner hingepin: 54mm at the outsides, 32mm at the insides (if you cut and removed the solid tube.)
Outer hingepin: 44mm at the outsides, 27mm at the insides.
Length: 143mm
Hingepin diameter: 4mm, inner and outer.

EDIT: I want to say someone had a thread looking for the exact same thing before for a Savage, might want to see if you can track it down.

EDIT AGAIN: Here it is, not as much info as I thought, but it's a start: http://www.rc-monster.com/forum/showthread.php?t=28110

	(#6)
simplechamp RC-Monster Titanium Offline Posts: 1,884 Join Date: Jul 2009	02.05.2011, 01:45 AM Went to go measure a spare arm from my Caster F8T, but the inner hingepin is a solid tube the whole way through, and you need it to be open? Mugen MBX5T/6T is the same way. Well, here are the measurements for the F8T anyway. Inner hingepin: 54mm at the outsides, 32mm at the insides (if you cut and removed the solid tube.) Outer hingepin: 44mm at the outsides, 27mm at the insides. Length: 143mm Hingepin diameter: 4mm, inner and outer. EDIT: I want to say someone had a thread looking for the exact same thing before for a Savage, might want to see if you can track it down. EDIT AGAIN: Here it is, not as much info as I thought, but it's a start: http://www.rc-monster.com/forum/showthread.php?t=28110 Caster Fusion F8T - Serpent 811Be - Jammin X2 carbon e-GT conversion - Axial SCX10 Last edited by simplechamp; 02.05.2011 at 02:18 AM.