RC-Monster Forums - View Single Post

fastbaja5b · 09:59 PM

Hey guys, wanting to run an RC8e with a MMP, and Castle Neu 2650 on 3s (Still to get the motor so will be a Leopard 36-60-2100kv for now)

Buggy would be set up for racing , geared for 30-35mph max. Servo is an Associated S2008MG which is what they run in most of the RTR 1/8 units, and which I know the MMP can handle quite well as it's in the RTR SC8e.

Would these be sufficient Battery Wise:
http://www.hobbycity.com/hobbyking/s...idProduct=9156

A pair of them in Parallel

Should give a max constant of 6400mah * 18C = 115.2 Amps
Burst - 6400mah * 27C = 172.8 Amps

Would prefer to run PQ packs, as I use these in my Race TC5 and they are awesome, 5050mah 30C and I have more punch on take off than these guys with Intellect 60C packs.

Is this a workable set up?

	(#1)
fastbaja5b RC-Monster Aluminum Offline Posts: 704 Join Date: May 2008	Battery Set up for RC8e / MMP - 02.09.2011, 09:58 PM Hey guys, wanting to run an RC8e with a MMP, and Castle Neu 2650 on 3s (Still to get the motor so will be a Leopard 36-60-2100kv for now) Buggy would be set up for racing , geared for 30-35mph max. Servo is an Associated S2008MG which is what they run in most of the RTR 1/8 units, and which I know the MMP can handle quite well as it's in the RTR SC8e. Would these be sufficient Battery Wise: http://www.hobbycity.com/hobbyking/s...idProduct=9156 A pair of them in Parallel Should give a max constant of 6400mah * 18C = 115.2 Amps Burst - 6400mah * 27C = 172.8 Amps Would prefer to run PQ packs, as I use these in my Race TC5 and they are awesome, 5050mah 30C and I have more punch on take off than these guys with Intellect 60C packs. Is this a workable set up? Say Less, Do More. Last edited by fastbaja5b; 02.09.2011 at 09:59 PM.