RC-Monster Forums - View Single Post

slimthelineman · 02.09.2011, 10:10 PM

Have used and raced with the 2650 In my rc8be and had friends use it too. It's a beast for sure and draws LOTS of current. The setup could work but with the mmpro I would go as high as I could with the c rating of the packs as I could wieght and size permiting. Wasn't my favorite race setup as it ran hot especially on 3s. Best bet IMO would be a pair of 3k 40c turnigy packs. Or go smaller on the capacity if your only doin 5-7 min runs. I ran 3s 6000 and could make 10 mins but it was close and the track was small.

	(#2)
slimthelineman RC-Monster Aluminum Offline Posts: 608 Join Date: Jul 2008 Location: IBEW	02.09.2011, 10:10 PM Have used and raced with the 2650 In my rc8be and had friends use it too. It's a beast for sure and draws LOTS of current. The setup could work but with the mmpro I would go as high as I could with the c rating of the packs as I could wieght and size permiting. Wasn't my favorite race setup as it ran hot especially on 3s. Best bet IMO would be a pair of 3k 40c turnigy packs. Or go smaller on the capacity if your only doin 5-7 min runs. I ran 3s 6000 and could make 10 mins but it was close and the track was small.