RC-Monster Forums - View Single Post - My e-revo brushless edition build

mistercrash · 02.13.2011, 11:05 AM

Ok you want to use the LST diffs as they come with the LST diff output cups right? Not replace the cups with modified Traxxas axles. Some guys have been doing it by putting an extra inner bearing in the carriers to push the LST CVD inwards towards the diff. I haven't tried that yet but I will fiddle around to see for myself if it works. By pushing the CVD towards the diff with that extra bearing, the pin meshes deeper in the LST diff output cups so that they don't pop out.

	(#8)
mistercrash Guelph, Canada, eh! Offline Posts: 1,083 Join Date: Sep 2007 Location: Guelph, Ontario, Canada	02.13.2011, 11:05 AM Ok you want to use the LST diffs as they come with the LST diff output cups right? Not replace the cups with modified Traxxas axles. Some guys have been doing it by putting an extra inner bearing in the carriers to push the LST CVD inwards towards the diff. I haven't tried that yet but I will fiddle around to see for myself if it works. By pushing the CVD towards the diff with that extra bearing, the pin meshes deeper in the LST diff output cups so that they don't pop out. No brain, no headaches.