Well I think itīs about time that I post my revo build here at rc-monster to so all of you that donīt hang out in the traxxas forum also can se the beuty
I wonīt post everything here just some teaser pics, If you want to see the whole process look at:
http://traxxas.com/forums/showthread...project./page1
In november 2009 I bought a used ( but nearly brand new) brushed E-revo with a novak 4.5 system in it and I have since then transformed it to a bash truck.
There has been many steps and fails trough the whole process and I think I have tried ALL the bolt on drivetrain solutions available with all the different ways of shimming diffs and making the driveshafts hold up.
And I have spent many many hours of making custom stuff and making them fit the truck, and now the work have payed off and Iīm very pleased with the truck
.
The truck has custom made battery mounts, first I made them overkill durable out of pure steel, but then I redid it and used som plastic parts instead to get it lighter.
It has a complete 1/8 "mistercrash inspired" drivetrain.
And ofcourse it has all the regular houps as rpm arms, alu parts here and there and all the other stuff that is needed. There is a small list of parts that will be bought soon enough to complete it, it contains:
*Rpm knuckles with steel rings for the front ( the stockers split in half..)
*The mount that the servosaver sits on in alu.
*Aluminium rockers.
*1/8 23mm hubs instead of my drilled ones.
*Titanium hingepins.
*And a fullskid like this:
